<h3>SparkFun Resistors</h3> This library contains resistors. Reference designator:R. <br> <br> We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. <br> <br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. <br> <br> <b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ <br> <br> You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <h3>AXIAL-0.3</h3> <p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p> >Name >Value <h3>AXIAL-0.1</h3> <p>Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes.</p> >Name >Value <h3>AXIAL-0.1-KIT</h3> <p>Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes.</p> <p><b>Warning:</b> This is the KIT version of the AXIAL-0.1 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p> >Name >Value <h3>AXIAL-0.3-KIT</h3> <p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p> <p><b>Warning:</b> This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p> >NAME >VALUE <p><b>Generic 1608 (0603) package</b></p> <p>0.2mm courtyard excess rounded to nearest 0.05mm.</p> >NAME >VALUE <p><b>Generic 1005 (0402) package</b></p> <p>0.2mm courtyard excess rounded to nearest 0.05mm.</p> >NAME >VALUE This is the "EZ" version of the standard .3" spaced resistor package.<br> It has a reduced top mask to make it harder to install upside-down. >Name >Value AXIAL-0.3 Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes. AXIAL-0.1 Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes. AXIAL-0.1-KIT Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes. Warning: This is the KIT version of the AXIAL-0.1 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. AXIAL-0.3-KIT Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes. Warning: This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. Generic 1608 (0603) package 0.2mm courtyard excess rounded to nearest 0.05mm. Generic 1005 (0402) package 0.2mm courtyard excess rounded to nearest 0.05mm. This is the "EZ" version of the standard .3" spaced resistor package. It has a reduced top mask to make it harder to install upside-down. >NAME >VALUE <h3>10kΩ resistor</h3> <p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p> <h3>1MΩ resistor</h3> <p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p> <h3>100kΩ resistor</h3> <p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p> <h3>100Ω resistor</h3> <p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p> <h3>1kΩ resistor</h3> <p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p> <h3>SparkFun Discrete Semiconductors</h3> This library contains diodes, optoisolators, TRIACs, MOSFETs, transistors, etc. <br> <br> We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. <br> <br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. <br> <br> <b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ <br> <br> You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. SOT23-3 >NAME >VALUE <b>TO 92</b> >NAME >VALUE >NAME >VALUE SOT23-3 TO 92 <h3> NPN Transistor</h3> Allows current flow when high potential at base. >NAME >VALUE <h3>NPN transistor</h3> <p>Current controlled devices typically used to amplify current or used as a switch.</p> <ul> <li> BC547 - <a href="http://www.sparkfun.com/products/8928">COM-08928</a> (TO-92 45V 100mA) (1.Collector 2.Base 3.Emitter) </li> <li> 2N3904 - <a href="http://www.sparkfun.com/products/521">COM-00521</a> (TO-92 40V 200mA) (1.Emitter 2.Base 3.Collector) </li> <li> P2N2222A - <a href="http://www.sparkfun.com/products/12852">COM-12852</a> (TO-92 40V 600mA) (1.Collector 2.Base 3.Emitter) </li> </ul> <h3>SparkFun Capacitors</h3> This library contains capacitors. <br> <br> We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. <br> <br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. <br> <br> <b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ <br> <br> You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <p><b>Generic 1005 (0402) package</b></p> <p>0.2mm courtyard excess rounded to nearest 0.05mm.</p> >NAME >VALUE <p><b>Generic 1608 (0603) package</b></p> <p>0.2mm courtyard excess rounded to nearest 0.05mm.</p> >NAME >VALUE <h3>CAP-PTH-SMALL-KIT</h3> Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).<br> <br> <b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. 2 PTH spaced 10mm apart >Name >Value EIA 7343 tantalum capacitor >Name >Value 2.5 mm spaced PTHs with 6.5 mm diameter outline >Value >Name Some old package in our library >NAME >VALUE <b>Panasonic Aluminium Electrolytic Capacitor VS-Serie Package E</b> >NAME >VALUE Generic 1005 (0402) package 0.2mm courtyard excess rounded to nearest 0.05mm. Generic 1608 (0603) package 0.2mm courtyard excess rounded to nearest 0.05mm. CAP-PTH-SMALL-KIT Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571). Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. 2 PTH spaced 10mm apart EIA 7343 tantalum capacitor 2.5 mm spaced PTHs with 6.5 mm diameter outline Some old package in our library Panasonic Aluminium Electrolytic Capacitor VS-Serie Package E >NAME >VALUE >NAME >VALUE <h3>0.1µF ceramic capacitors</h3> <p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p> <h3>0.01uF/10nF/10,000pF ceramic capacitors</h3> <p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p> CAP-09321 <h3>4.7pF ceramic capacitors</h3> <p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p> <h3>100µF polarized capacitors</h3> <p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p> <b>Inductors and Filters</b><p> Based on the previous library ind-a.lbr<p> <author>Created by librarian@cadsoft.de</author> <B>INDUCTOR</B><p> B82144, verticalmanufacturer Siemens >NAME >VALUE INDUCTOR B82144, verticalmanufacturer Siemens >NAME >VALUE <B>INDUCTOR</B> SMA DIP Connector 90° 50 Ohm >NAME >VALUE >NAME >VALUE >LABEL >NAME >VALUE >LABEL <b>TO-92</b> >NAME >VALUE <b>TO-220</b> >NAME >VALUE <b>Metal Can Package</b> >NAME >VALUE <b>SMALL OUTLINE TRANSISTOR</b><p> TS-003 >NAME >VALUE >NAME >VALUE >NAME >VALUE GND <b>SMA Connector</b> <p>90° DIP SMA Connector, 50 Ohm (4UConnector: 07259)</p> Positive <b>VOLTAGE REGULATOR</b> <p> Added bigger pads to the TO-92 package <h3>SparkFun Electronics' Retired foot prints</h3> In this library you'll find all manner of retired footprints for resistors, capacitors, board names, ICs, etc., that are <b> no longer used</b> in our catalog. <br> <br> We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. <br> <br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. <br> <br> <b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ <br> <br> You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. >NAME >VALUE >NAME >VALUE 10uF Tantalum SMT<br> CAP-00811- 16V 10% (EIA-3216) <h3>SparkFun Connectors</h3> This library contains electrically-functional connectors. <br> <br> We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. <br> <br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. <br> <br> <b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ <br> <br> You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <h3>Deans Connector</h3> <p>Specifications: <ul><li>Pin count:2</li> </ul></p> <p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/deans_connector_PRT-11864.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>BATTERY_CONN</li> </ul></p> >NAME >VALUE Deans Connector Specifications: Pin count:2 Datasheet referenced for footprint Example device(s): BATTERY_CONN <h3>Battery Connection</h3> <p></p> >VALUE >NAME <h3>Battery Connectors</h3> <p>Various footprints for battery connections</p> <p>SparkFun Products: <ul><li><a href="https://www.sparkfun.com/products/11864">Deans Connector -M/F Pair</a></li> </ul></p> Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version. Since Version 8.4, EAGLE supports properties for SPICE simulation. Probes in schematics and SPICE mapping objects found in parts and library devices will not be understood with this version. Update EAGLE to the latest version for full support of SPICE simulation.