<h3>SparkFun Resistors</h3>
This library contains resistors. Reference designator:R.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>AXIAL-0.3</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p>>Name>Value<h3>AXIAL-0.1</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes.</p>>Name>Value<h3>AXIAL-0.1-KIT</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes.</p>
<p><b>Warning:</b> This is the KIT version of the AXIAL-0.1 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>>Name>Value<h3>AXIAL-0.3-KIT</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p>
<p><b>Warning:</b> This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>>NAME>VALUE<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 1005 (0402) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUEThis is the "EZ" version of the standard .3" spaced resistor package.<br>
It has a reduced top mask to make it harder to install upside-down.>Name>ValueAXIAL-0.3
Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.AXIAL-0.1
Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes.AXIAL-0.1-KIT
Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes.
Warning: This is the KIT version of the AXIAL-0.1 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.AXIAL-0.3-KIT
Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.
Warning: This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.Generic 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 1005 (0402) package
0.2mm courtyard excess rounded to nearest 0.05mm.This is the "EZ" version of the standard .3" spaced resistor package.
It has a reduced top mask to make it harder to install upside-down.>NAME>VALUE<h3>10kΩ resistor</h3>
<p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p><h3>1MΩ resistor</h3>
<p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p><h3>100kΩ resistor</h3>
<p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p><h3>100Ω resistor</h3>
<p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p><h3>1kΩ resistor</h3>
<p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p><h3>SparkFun Discrete Semiconductors</h3>
This library contains diodes, optoisolators, TRIACs, MOSFETs, transistors, etc.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.SOT23-3>NAME>VALUE<b>TO 92</b>>NAME>VALUE>NAME>VALUESOT23-3TO 92<h3> NPN Transistor</h3>
Allows current flow when high potential at base.>NAME>VALUE<h3>NPN transistor</h3>
<p>Current controlled devices typically used to amplify current or used as a switch.</p>
<ul>
<li>
BC547 -
<a href="http://www.sparkfun.com/products/8928">COM-08928</a>
(TO-92 45V 100mA) (1.Collector 2.Base 3.Emitter)
</li>
<li>
2N3904 -
<a href="http://www.sparkfun.com/products/521">COM-00521</a>
(TO-92 40V 200mA) (1.Emitter 2.Base 3.Collector)
</li>
<li>
P2N2222A -
<a href="http://www.sparkfun.com/products/12852">COM-12852</a>
(TO-92 40V 600mA) (1.Collector 2.Base 3.Emitter)
</li>
</ul><h3>SparkFun Capacitors</h3>
This library contains capacitors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<p><b>Generic 1005 (0402) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<h3>CAP-PTH-SMALL-KIT</h3>
Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).<br>
<br>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.2 PTH spaced 10mm apart>Name>ValueEIA 7343 tantalum capacitor>Name>Value2.5 mm spaced PTHs with 6.5 mm diameter outline>Value>NameSome old package in our library>NAME>VALUE<b>Panasonic Aluminium Electrolytic Capacitor VS-Serie Package E</b>>NAME>VALUEGeneric EIA 3216 (1206) polarized tantalum capacitor>NAME>VALUE<p><b>Polarized 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUEGeneric EIA 3528 polarized tantalum capacitor>NAME>VALUE2.5 mm spaced PTHs with 5 mm diameter outline and standard solder mask>Name>Value2.5 mm spaced PTHs with top copper masked>Name>ValueMetric Size Code EIA 6032-25 Median (Nominal) Land Protrusion<br />
http://www.kemet.com/Lists/ProductCatalog/Attachments/254/KEM_T2005_T491.pdf>Name>ValueGeneric 1005 (0402) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.CAP-PTH-SMALL-KIT
Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).
Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.2 PTH spaced 10mm apartEIA 7343 tantalum capacitor2.5 mm spaced PTHs with 6.5 mm diameter outlineSome old package in our libraryPanasonic Aluminium Electrolytic Capacitor VS-Serie Package EGeneric EIA 3216 (1206) polarized tantalum capacitorPolarized 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic EIA 3528 polarized tantalum capacitor2.5 mm spaced PTHs with 5 mm diameter outline and standard solder mask2.5 mm spaced PTHs with top copper maskedMetric Size Code EIA 6032-25 Median (Nominal) Land Protrusion
http://www.kemet.com/Lists/ProductCatalog/Attachments/254/KEM_T2005_T491.pdf>NAME>VALUE>NAME>VALUE<h3>0.1µF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>0.01uF/10nF/10,000pF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p>
CAP-09321<h3>4.7pF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>100µF polarized capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>10.0µF polarized capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><b>Inductors and Filters</b><p>
Based on the previous library ind-a.lbr<p>
<author>Created by librarian@cadsoft.de</author><B>INDUCTOR</B><p>
B82144, verticalmanufacturer Siemens>NAME>VALUEINDUCTOR
B82144, verticalmanufacturer Siemens>NAME>VALUE<B>INDUCTOR</B>SMA DIP Connector 90° 50 Ohm>NAME>VALUE>NAME>VALUE>LABEL>NAME>VALUE>LABEL<b>TO-92</b>>NAME>VALUE<b>TO-220</b>>NAME>VALUE<b>Metal Can Package</b>>NAME>VALUE<b>SMALL OUTLINE TRANSISTOR</b><p>
TS-003>NAME>VALUE>NAME>VALUE>NAME>VALUEGND<b>SMA Connector</b>
<p>90° DIP SMA Connector, 50 Ohm (4UConnector: 07259)</p>Positive <b>VOLTAGE REGULATOR</b>
<p>
Added bigger pads to the TO-92 package<h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Molex 2-Pin Plated Through-Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST-Right Angle Male Header SMT</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
<li>JST_2MM_MALE</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.15"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST-Vertical Male Header SMT </h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value<h3>Screw Terminal 5mm Pitch -2 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 5mm/197mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - Locking Footprint</h3>
Holes are staggered by 0.005" from center to hold pins while soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Molex 2-Pin Plated Through-Hole Locking Footprint</h3>
Holes are offset from center by 0.005" to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - Long Pads with Locking Footprint</h3>
Pins are staggered by 0.005" from center to hold pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking</h3>
Holes are offset from center 0.005" to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - Long Pads without Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST 2 Pin Right Angle Plated Through Hole</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value+-<h3>Plated Through Hole - 0.1" holes</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.2"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Pogo Pins Connector - No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST 2 Pin Right Angle Plated Through Hole- No Silk</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<br> No silk outline of connector.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value+-<h3>JST 2 Pin Right Angle Plated Through Hole - KIT</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<br> This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad.
<br> This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value+-<h3>Spring Terminal- PCB Mount 2 Pin PTH</h3>
tDocu marks the spring arms
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/SpringTerminal.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p><h3>2 Pin Screw Terminal - 2.54mm</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE2 pin poke-home connector
part number 2062-2P from STA>NAME>VALUE>NAME>VALUEPlated Through Hole
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Molex 2-Pin Plated Through-Hole
Specifications:
Pin count:2
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_02
Screw Terminal 3.5mm Pitch - 2 Pin PTH
Specifications:
Pin count: 2
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_02
JST-Right Angle Male Header SMT
Specifications:
Pin count: 2
Pin pitch: 2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
JST_2MM_MALE
Plated Through Hole
Specifications:
Pin count:2
Pin pitch:0.15"
Example device(s):
CONN_02
JST-Vertical Male Header SMT
Specifications:
Pin count: 2
Pin pitch: 2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
Screw Terminal 5mm Pitch -2 Pin PTH
Specifications:
Pin count: 2
Pin pitch: 5mm/197mil
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - Locking Footprint
Holes are staggered by 0.005" from center to hold pins while soldering.
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Molex 2-Pin Plated Through-Hole Locking Footprint
Holes are offset from center by 0.005" to hold pins in place during soldering.
Specifications:
Pin count:2
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - Long Pads with Locking Footprint
Pins are staggered by 0.005" from center to hold pins in place while soldering.
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking
Holes are offset from center 0.005" to hold pins in place during soldering.
Specifications:
Pin count: 2
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - Long Pads without Silk Outline
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Plated Through Hole - No Silk Outline
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
JST 2 Pin Right Angle Plated Through Hole
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
Specifications:
Pin count: 2
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - 0.1" holes
Specifications:
Pin count:2
Pin pitch:0.2"
Example device(s):
CONN_02
Pogo Pins Connector - No Silk Outline
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline
Specifications:
Pin count: 2
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_02
JST 2 Pin Right Angle Plated Through Hole- No Silk
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
No silk outline of connector.
Specifications:
Pin count: 2
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
JST 2 Pin Right Angle Plated Through Hole - KIT
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad.
This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
Specifications:
Pin count: 2
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
Spring Terminal- PCB Mount 2 Pin PTH
tDocu marks the spring arms
Specifications:
Pin count: 4
Pin pitch: 0.1"
Datasheet referenced for footprint
Example device(s):
CONN_02
2 Pin Screw Terminal - 2.54mm
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
2 pin poke-home connector
part number 2062-2P from STA<h3>2 Pin Connection</h3>>VALUE>NAME<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.<br><br>
2.54_SCREWTERM for use with PRT-10571.<br><br>
3.5mm Screw Terminal footprints for PRT-08084<br><br>
5mm Screw Terminal footprints for use with PRT-08432<h3>SparkFun Power Symbols</h3>
This library contains power, ground, and voltage-supply symbols.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Digital Ground Supply</h3>>VALUE<h3>Ground Supply Symbol</h3>
<p>Generic signal ground supply symbol.</p><h3>SparkFun Electronics' Retired foot prints</h3>
In this library you'll find all manner of retired footprints for resistors, capacitors, board names, ICs, etc., that are <b> no longer used</b> in our catalog.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.Fits EIAJ packages (wide version of the SOIC-8).>NAME>VALUE<b>Dual In Line Package</b>>NAME>VALUE>Value>Name<h3>Atmel 8-pin 2/4/8kB flash uC</h3>
<p>Retired</p>
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.
Since Version 8.4, EAGLE supports properties for SPICE simulation.
Probes in schematics and SPICE mapping objects found in parts and library devices
will not be understood with this version. Update EAGLE to the latest version
for full support of SPICE simulation.